15 allied components interna tional 714-665-1 140 www.a lli edcom pon en ts .com rohs 12/05/11 schematics dimensions:inch( mm) unless otherwise specified, all tolerances are 0.010(0.25) pin 4,8,9,13 moved 0.799(20.30) 0. 38 2(9.7) 0. 26 8(6.80)max 0.020(0.50) 0. 10 0(2. 54) 0.300(7.62) 0.118(3.00) allied da tec ode AHTA-1612S 1ct:1ct 3 1 2 11 12 10 td rd 1ct:1ct 16 14 6 5 7 tx rx 15 all specifications subject to change without notice. mechanical 10/100 base t single port transformer AHTA-1612S cw/w: 25pf typ @ 100khz, 0.2v polarity: 1-7, 16-10, in-phase ll: 0.5h max @ 100khz, 0.2v dcr: 0.9 operating temp: 0oc to 70oc max electrical speci?cations @ 25c part number ocl(uh min) @ 100khz, 200mv turns ratio chip: cable (5%) insertion loss (db max) return loss (db min) with 8ma dc bias 0.3-100mhz 0.3-30mhz 40mhz AHTA-1612S 350 1ct:1ct(tx)/1ct:1ct(rx) -1.1 -18 -16 60-80mhz -12 50mhz -14.5 part number AHTA-1612S electrical speci?cations @ 25c cross talk (db min) hi-pot (vrms) -35 1500 0.3-30mhz -40 80-100mhz -30 common mode rejection (db min) 60-100mhz -35 0.3-30mhz -42 60mhz isolation ?
|
